Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front shock absorbers of the Peugeot 3008.

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Shocks

Today we will explain how to replace the front shock absorbers of the Peugeot 3008 1. First, we open the front hood and remove the windshield frame and wipers. We take off the covers of the wiper arm nuts and, using a 13mm socket wrench, we unscrew the nuts and remove the arms with small upward movements. Next, we remove the plastic covers to take off the windshield frame seal. Using a 21mm Allen key and a 7mm socket wrench, we unscrew the nut of the upper shock absorber cup. We then remove the front wheels and lift the vehicle to replace the front shock absorbers. We detach the joint from the stabilizer bar and the shock absorbers using a link, and with a wire brush, we clean the threads of the screws and use a penetrating oil to unscrew the nut with an 18mm socket wrench; we loosen the screw located at the base of the shock absorber and remove the nut with an 18mm wrench. If we vary the base of the shock absorber from the hub carrier, we support the hub carrier lock and unscrew the fixing screws of the upper shock absorber cup. We detach the shock absorber from the spring to remove it. We then select the shock absorber inside the upper cup and begin the installation by reversing the procedure.

Posted on 1 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2009-2016 / T84, MK 1) To replace the diesel filter of the Peugeot 3008, open the hood, remove the engine cover, disconnect the electrical connector and the three fuel line…
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the battery on a Peugeot 3008? Remove the old battery and install a new one. Open the car door and pull up the engine compartment release l…
Peugeot 3008 (2009-2016 / T84, MK 1) Before starting, open the bonnet of your Peugeot 3008. Begin by removing the front bumper by unscrewing the screws and bolts along the entire perimet…

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos