Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on a Peugeot 108?

Model: Peugeot 108 MK 1 - Years 2014-2021
Part:

It will be possible to completely turn off the tire pressure warning light that appears on the instrument panel of the Peugeot 108 by first inflating the tires to the recommended pressure value: this value can be found on the sticker attached to the door pillar of the driver's side. Once all the tires have been inflated, you can turn on the instrument panel and then open the glove compartment located on the passenger side: at this point, you will be able to locate the button that allows you to reset the tire pressure. By holding down this button, you will notice that the warning light will be reset.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 108
How to Reset the Tyre Pressure Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure light on a Peugeot 108, start by turning on the ignition. Notice the yellow light on the dashboard indicating that you nee…
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…
How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) It will be possible to reset the tire pressure light of the Peugeot 108 by inflating the tires to the corresponding pressure value: once the inflatio…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos