Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Today, we will show you how to install an Android car radio in a Peugeot 308. Remove the side covers of the central console using a plastic trim removal tool. Before removing the central console, also take out the glove compartment below it. Remove the cover of the air conditioning knobs and using a star screwdriver, unscrew all the screws that secure the car radio.

Disconnect the antenna cable and the electrical connector. Connect the USB cables and other electrical cables, including the antenna cable, to the new car radio.

Insert the rear camera operation cables into the console. Install the car radio in the slot.

Reassemble the central console and replace it in its position.


Posted on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio from Peugeot 308
How to Remove the Car Radio from Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the car radio installed in a Peugeot 308? Let's look at removing the original car radio. Start by removing the ashtray located near…
How to Remove the Original Radio from a Peugeot 308
How to Remove the Original Radio from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the original radio from a Peugeot 308? Follow these steps carefully to carry out the removal. Obtain the original or aftermarket me…
How to Remove the Stereo from a Peugeot 308
How to Remove the Stereo from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To remove the factory-installed stereo from the Peugeot 308, you will need the specific extraction tool set for the stereo. Obtain this before starti…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos