Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this brief guide, you will find instructions on how to reset the service light for the routine maintenance oil change on the Peugeot 208. First, get inside the vehicle and start pressing and holding the "set" button located at the bottom right of the instrument panel; then turn the key to position one, waiting for the maintenance light and service mileage counter to reset, as shown in the video.

At this point, turn off the instrument panel and start the engine, verifying the actual reset of the service!


Posted on 15 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Peugeot 208 mk1
Resetting the Service Light on the Peugeot 208 mk1
Peugeot 208 (2012-2019 / MK 1, A9) To deactivate the service light on the Peugeot 208, first turn off the ignition by turning the key. Press and hold the reset button for the trip mile…
How to reset the service light on a Peugeot 208.
How to reset the service light on a Peugeot 208.
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) The reset of the service light on a second-generation Peugeot 208 consists of simple and quick steps that can be performed independently. To reset th…
How to reset the service light on the Peugeot 208
How to reset the service light on the Peugeot 208
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) This guide will describe all the steps necessary to correctly complete the manual reset procedure for the service light on your Peugeot 208 Mk2. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos