Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Drive Belt and Tensioner on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

How to change the drive belt on your car. You will need: a new drive belt, vehicle manual, screwdriver, Torx screwdriver, Allen key, spanner. I assure you, it's not complicated. Take a flathead screwdriver and lever off the plastic cover on the seatbelt attachment to expose it properly. This will allow the plastic to come off easily. Now, take your Allen key and remove the small bolt that secures the seatbelt mechanism. Pull the mechanism towards you to disengage it from its housing. I assure you, it's not complicated.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Replace the External Rear-View Mirror on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Here are the main instructions for removing and replacing the external rear-view mirror on a Peugeot 206, in simple and quick steps. First, open the …
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) Next, we will discover the steps that will allow you to disassemble and replace the timing belt on the Peugeot 206 1.4 HDi. First, lift the vehicle a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos