Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of a Peugeot 308 1.2

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Battery

Before you start, open the bonnet of your Peugeot 308 1.2. Begin by removing the upper battery bracket, then move the cover of the positive terminal connected to the battery. Once done, unscrew and remove the screws that secure the two terminals to the battery, then disconnect them. Next, unscrew and remove the lower bolt that secures the battery, and then extract the battery from its housing. After completing this step, you will have finished the removal. To install the new battery, repeat this process in reverse, and you will have completed the replacement.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
How to Replace the Remote Battery of the Peugeot 308?
How to Replace the Remote Battery of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the battery of the remote control for the Peugeot 308, use an object to pry open the cover at the bottom of the device, detaching the rear…
How do you replace the battery of the Peugeot 308?
How do you replace the battery of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the battery installed on the Peugeot 308, you need to open the hood so that you can access the components in the engine compartment: the b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos