Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program Peugeot Remote

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

After replacing the battery in your ignition key, or after requesting a duplicate from a specialist shop, you will need to program it. How to do it? It's very simple! Sitting in the driver's seat with all doors closed, insert the key and turn it to the ON position (ignition on) and hold the key's ignition button for about ten seconds. Turn off the ignition, and ONLY THEN release the button. Voila! You're done. This procedure is useful for many Peugeot models, including the Peugeot 206, but each car should have its own instructions in the supplied manual.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Battery of a Peugeot 206 Remote
How to Change the Battery of a Peugeot 206 Remote
Peugeot 206 (1998-2012 / MK 1) Replace the remote battery when it is flat. Take your remote and use a screwdriver to remove the tiny retaining screw that secures the two covers. Pr…
Removing the Remote Key from a Peugeot 206
Removing the Remote Key from a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Removing the key from a Peugeot 206? It's a very simple operation; let's see how to do it. Unscrew the tiny screw located on the key cover with a scr…
How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To program the key of the Peugeot 206, you need to connect a diagnostic tool to the OBD port of the vehicle, after inserting the blank key into the k…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos