Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Air filter

To replace the air filter on a Peugeot 208, lift the bonnet to access the engine compartment. Use a flat-head screwdriver to disconnect an orange connector located at the top of the engine. Another connector can be simply pulled off by opening the two clips; it is located on the filter box. This can be opened by removing the screws that secure the lid; once the box is open, slide out the old filter and replace it with a new spare part. After the replacement, close the box and reconnect the connectors.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the air filter of the Peugeot 208
How to change the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you are looking for a guide to help you complete the replacement of the engine air filter for your Peugeot 208, then all you have to do is pay att…
How to replace the air filter of the Peugeot 208
How to replace the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) The engine air filter in your first edition Peugeot 208 plays a very important role, that is to allow the engine to breathe and therefore to perform …
How to Replace the Air Filter on a Peugeot 208
How to Replace the Air Filter on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to replace the engine air filter on a Peugeot 208? Follow this guide: open the car door, pull up the lever to open the engine compartment located…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos