Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Pressure Sensor on the Peugeot Expert?

Model: Peugeot Expert MK 1, Mark1 - Years 1995-2007
Part: Checks and maintenance

To replace the diesel pressure sensor on the Peugeot Expert, open the bonnet to access the engine bay and remove the engine cover. This will allow you to access the sensor, which is connected to the relevant pipes and connectors and is located at the rear of the engine. Unscrew it, pull it out of its housing, and disconnect it from its connectors. You can then replace it with a new spare part: insert the new sensor into its housing and connect it to its connectors.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on Peugeot Expert
How to Replace the Diesel Filter on Peugeot Expert
Peugeot Expert (1995-2007 / MK 1, Mark1) Replacing the diesel filter on a Peugeot Expert? This operation is not too complicated; let's see how to disassemble it. Lift the front bonnet of the…
Replacing the Fuel Filter on a Peugeot Expert
Replacing the Fuel Filter on a Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Open the bonnet and observe the engine compartment. If you are facing it and therefore looking towards the cabin, the fuel filter is located on your …
How do you reset the tire pressure warning light on the Peugeot Expert?
How do you reset the tire pressure warning light on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) In order to reset the tire pressure warning light on the Peugeot Expert, you first need to inflate the tires until they reach the correct pressure va…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos