Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Wing on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

To replace the front wing on a Peugeot 206, first open the bonnet and loosen the screws that secure the upper front grille, allowing it to be completely removed. Next, the screws securing the front headlights will be visible; these can be unscrewed, disconnecting the rear connector to remove the headlight. Now, detach the front bumper to free it from the wing: the wing can be completely removed by loosening the screws inside it. After removal, you can install a new one.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Is the front bumper on your Peugeot 206 due for replacement? Here’s how to remove it. Lift the bonnet and secure it. Remove the cover above the front…
Peugeot 206 (1998-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Peugeot 206. First of all, let's mov…
Peugeot 206 (1998-2012 / MK 1) These brief instructions will guide us through the process of disassembling and replacing the front bumper of the Peugeot 206. First, we open the hoo…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos