Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Quickly Polish Cloudy Headlights on the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Video tutorial

In this video tutorial, you will find instructions to restore the clarity of the front headlights on the Peugeot 207. First, clean the headlight thoroughly; then use very fine sandpaper to rub over the headlight, making uniform movements as shown in the video.

It is important to use the sandpaper with a solution of water and soap to avoid scratching the headlight and creating grooves that could damage it. With each pass, always use a finer grit to perfect the job!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Polish the Headlights of a Peugeot 207
How to Polish the Headlights of a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today, you will learn how to polish the headlights of a Peugeot 207 independently and at a low cost. Open the front bonnet and apply masking tape aro…
How to Replace the Headlight Connectors on a Peugeot 207
How to Replace the Headlight Connectors on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) When the headlight bulbs have been replaced but the light still does not turn on, the cause lies in the malfunction of the connectors. In these cases…
Where to Find the Fuse Box of the Peugeot 207
Where to Find the Fuse Box of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this guide for all Peugeot 207 owners, discover the steps to quickly locate the car's fuse box. First, completely switch off the vehicle and go ou…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the Peugeot 207 oil pressure sensor located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos