Do it yourself
| ||||
|
Peugeot 308 - Video tutorial
Model: Peugeot 308
MK 2, T9
- Years 2013-2021 AdBlue is a special liquid introduced for some years now in all vehicles equipped with a Diesel engine. Its main function is to reduce the pollution levels of these systems in an economical and efficient way and for this reason it is important to carry out regular maintenance. Below we will find out how to fill up correctly inside the Peugeot 308 Station Wagon. First, turn off the car completely. Go to the back and raise the hood. Remove the protective fabric layer and the plastic cover underneath. Locate the blue cap located next to the spare wheel and unscrew it. Using a funnel or a rubber hose, pour the new AdBlue into the tank. Finally, screw the cap back on and reposition correctly the various components removed previously.
Posted on 16 April 2024 by ScegliAuto
How to top up AdBlue on a Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) Before we can start, we will have to open the tailgate of the rear trunk of our Peugeot 308. Let's start then by going to disengage and remove the lo
How to reset the Peugeot 308 AdBlue warning light
Peugeot 308 (2013-2021 / MK 2, T9) Let's see in this guide how to reset the AdBlue warning light on the Peugeot 308, but also on the 3008. Before carrying out the reset, it is necessar
How to reset the Peugeot 308 AdBlue warning light
Peugeot 308 (2013-2021 / MK 2, T9) In this guide, let's see the main instructions that will allow us to reset the AdBlue warning light on the Peugeot 308. Before resetting the warning Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |