Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs in a Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Glow plugs

See other generations:
Video tutorial

In this tutorial, see how to replace the glow plugs in a Peugeot 208, a very simple operation. First, create some working space by removing the wipers, the bonnet seal, and the plastic panel in front of the windscreen.

Next, also remove the crossbar, engine cover, intake manifold, and the filter box cover. At this point, you can finally disconnect the cables from the glow plugs and proceed with their replacement using the appropriate spanner.

If available, tighten the glow plugs with a torque wrench set to 10 Nm.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
How to Adjust the Handbrake on the Peugeot 208?
How to Adjust the Handbrake on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) In this tutorial, see how to adjust the handbrake on the Peugeot 208, a very simple and quick operation. First, park the vehicle on a level surface w…
How to Reset the "Service" Light on a Peugeot 208
How to Reset the "Service" Light on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Before you can begin, sit in the driver's seat of your Peugeot 208. Start by pressing and holding the "SET" button located at the bottom right of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos