Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Airbag in the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Airbag

Video tutorial

The procedure for removing the airbag in your Peugeot 206 is very simple. First, disconnect the negative terminal of the car battery for your safety before performing any other operations.

Once done, at the bottom and back of the steering wheel (when in the upright position), there is a hole. Use a flathead screwdriver to push the steel clip to detach the airbag.

At this point, you will have access to the connections of the airbag unit with the steering wheel. Be careful not to pull; check all connections carefully and first disconnect the locking tab of the airbag control electrical connector (red wire).

Next, disconnect the two yellow connectors with white wires securing the airbag to the steering wheel and the grey connector with a white wire attached to the left side of the steering wheel. Once this is done, replace with a new airbag and reassemble everything.

If you wish to remove it instead, use a Torx key to unscrew the central fixing screw of the steering wheel, pull the wires through the designated hole, and when remounting the steering wheel, ensure the correct position of the guide pin located at the back.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Peugeot 206 (1998-2012 / MK 1) How do you remove the steering wheel airbag from a Peugeot 206? Start by disconnecting the battery terminals located in the dedicated compartment. Pr…
Peugeot 206 (1998-2012 / MK 1) In this brief video tutorial, see how to remove the steering wheel airbag from a Peugeot 206. Before starting this operation, it is crucial to discon…
Peugeot 206 (1998-2012 / MK 1) Do you want to remove the steering wheel with the airbag from your Peugeot 206? Here’s how to detach the airbag from the steering wheel and then the …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos