Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Supply Pipe on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Carburetor

Video tutorial

When you notice a small fuel leak from the supply pipe of the tank, you can replace the flexible pipe connected to the tank. To do this, remove the right rear wheel (the side of the fuel cap), then remove the plastic inner wheel arch liner.

At this point, you will have access to the flexible rubber pipe. Lift the car and loosen the two hose clips located at both ends of the pipe.

This will allow you to remove the pipe and replace it with a new one, then replace the clips and refit them.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on the Peugeot 206
How to Replace the Fuel Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and re…
Fuel Pump Replacement for Peugeot 206
Fuel Pump Replacement for Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This brief and simple procedure shows how to remove and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, open the rear doo…
Replacing the fuel pump on a Peugeot 206
Replacing the fuel pump on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's look at removing the fuel pump from the Peugeot 206 located inside the fuel tank. Lift the front bonnet, disconnect the battery cables, then re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos