Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the cabin filter on a Peugeot 208 mk1

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel particulate filter

See other generations:
Video tutorial

The pollen filter, commonly known as the cabin filter, is essential for keeping the air entering the cabin breathable, especially when the air conditioning is turned on. It is good practice to replace it at every service. In this video, you will see how to replace it yourself on a Peugeot 208 mk1 using only a flat screwdriver.

Open the car's bonnet and remove the air intake covers between the engine compartment and the windscreen. Below, the two cabin filters are housed.

To remove them, simply unclip them with a screwdriver and pull them out of their housing. Next, reposition the new filters and close the covers, ensuring that the clips are securely locked.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the cabin filter on a Peugeot 208, open the bonnet to access the grille located at the top of the engine bay, just below the windscreen. B…
How to replace the cabin filter in the Peugeot 208?
How to replace the cabin filter in the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Replacing the cabin air filter in your Peugeot 208 Mk1 is a very important task, but fortunately, it takes only a few seconds to complete. Below you …
How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos