Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Boxer
    4. : How to reset the service on the Peugeot Boxer 2020

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: -board computer
Operation: How to reset the service on the Peugeot Boxer 2020

After carrying out the oil change service and relative filter on your car we must proceed to reset the service warning light on the instrument panel, to do this. Follow the simple instructions shown on the video in this description. The first thing to do is sit in the driver's seat, turn on the ignition and press the accelerator pedal all the way down and immediately after also press the brake pedal and keep them both pressed for about 10 seconds until the service indication on the display will turn off. To check, switch the ignition off and on again.


Posted on 14 May 2024 by ScegliAuto



How to reset the service warning light alarm on the Peugeot Boxer 2
Peugeot Boxer (2006-2023 / MK 2) In this video tutorial we will see the steps that will allow us to reset the ordinary maintenance service light on the Peugeot Boxer second series, b
How to reset the service warning light on the Fiat Ducato - Peugeot Boxer
Peugeot Boxer (2006-2023 / MK 2) In this short and simple guide we will see the instructions that will allow us to reset the service light of the ordinary maintenance of the oil chan
How to reset the Peugeot Boxer service
Peugeot Boxer (2006-2023 / MK 2) In today's video we see how to reset the Peugeot Boxer service warning light (but this video also applies to the Citroen Jumper and Fiat Ducato twins

    Frequently Asked Questions

    • Boxer 2006-2023 - What does the AdBlue warning light on the Peugeot Boxer mean? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos