Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How to engage neutral with the engine off in the Peugeot 508 automatic

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 2 - Years 2018-2024
Part: Gearbox
Operation: How to engage neutral with the engine off in the Peugeot 508 automatic

We see in this video the procedure for inserting neutral with the engine off in the second series Peugeot 508 equipped with automatic gearbox. Let's start by turning on the panel by pressing the star & stop button once. Now select N using the selector and then turn off the car. Now take your foot off the brake and then turn the ignition back on by pressing the power button. We press the brake pedal and at the same time give a flick of the selector lever by pressing "UNLOCK". We can turn off the car by pressing the power button used previously. Procedure completed.


Posted on 14 July 2022 by ScegliAuto

    Frequently Asked Questions

    • 508 2010-2018 - How can I unlock the automatic gearbox of the Peugeot 508? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos