Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement Instructions

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Engine oil

Video tutorial

Open the front bonnet and unscrew the oil filler cap to facilitate draining (preferably with the engine warm); position a container under the oil sump to collect the used oil and unscrew the drain plug (if possible, place the vehicle on suitable ramps); once draining is complete, refit the plug using a new copper washer; then proceed to fill the engine with new oil until the correct level is reached; it is advisable to replace the oil filter with every oil change, but it can also be done every other time.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Oil Filter on Peugeot 206 1.4 HDi
Replacing the Oil Filter on Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) The oil filter is often changed along with the engine oil; let's see how to proceed with the replacement. Pull up the bonnet release lever located at…
Oil Filter Replacement on a Peugeot 206
Oil Filter Replacement on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replacing the oil filter on a Peugeot 206? Here’s how to remove it from the engine bay. Lift the bonnet and secure it, then use a strap wrench to uns…
Replacing the Engine Oil and Oil Filter of a Peugeot 206 1.1
Replacing the Engine Oil and Oil Filter of a Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Today, we will discover the procedure that will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of a P…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos