Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Engine oil and fillter replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Oil filter
Operation: Engine oil and fillter replacement

Remove the plastic cover placed and open the oil cap (this will help drain); remove the plastic protection from under the engine and place a tray to collect the used oil: then unscrew the drain plug located behind the oil pan; once the drain is complete, screw the cap back on with a new copper washer; the oil filter is instead located under the diesel filter and a metal clamp wrench is required to unscrew it; then screw the new filter after having sprinkled the gasket with oil and without exceeding the tightening torque; finally, fill the engine with new oil until the maximum level is reached.


Posted on 8 August 2023 by ScegliAuto



Engine oil and fillter replacement
Peugeot 206 (1998-2012 / MK 1) Before lifting the car to access the oil pan, open the bonnet, unscrew the filler cap and extract the splint to facilitate oil drainage; then place a
Engine oil replacement instructions
Peugeot 206 (1998-2012 / MK 1) Open the front hood and unscrew the oil filler cap to facilitate draining (preferably with the engine warm); place a basin under the oil pan to colle
Replacement of the engine oil and oil filter of the Peugeot 206 1.1
Peugeot 206 (1998-2012 / MK 1) Today we will discover the procedure that will allow us to perform the routine maintenance service, replacing the engine oil and oil filter, of the P

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - Where is the Peugeot 206 oil filter located? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos