Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Peugeot Expert Van?

Model: Peugeot Expert Mark3, MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Brake pads

See other generations:
This video is currently unavailable

In this tutorial, you will learn how to replace the front brake pads on a Peugeot Expert van, a very simple task. First, lift the side you will be working on with a jack, taking all necessary safety precautions.

Then, remove the wheel and undo the lower caliper bolt using a 10 mm spanner. Next, rotate the caliper upwards, remove the old pads using a flat-head screwdriver, and clean any dirt residue.

Finally, push the piston fully back, insert the replacement pads, and reassemble everything by following the reverse procedure.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Peugeot Expert Van?
How to Reset the Service Light on a Peugeot Expert Van?
Peugeot Expert (2008-2016 / Mark2, MK 2) In this tutorial, you will learn how to reset the service light on a Peugeot Expert van, a very simple and quick operation, to be performed only afte…
How to Replace the Starter Motor in the Peugeot Expert Van?
How to Replace the Starter Motor in the Peugeot Expert Van?
Peugeot Expert (2008-2016 / Mark2, MK 2) In this tutorial, see how to replace the starter motor in the Peugeot Expert van, a relatively simple operation. Before doing this, remove the panel …
How to Replace the Radio in a Peugeot Expert Van?
How to Replace the Radio in a Peugeot Expert Van?
Peugeot Expert (2016-2025 / Mark3, MK 3) In this tutorial, you will see how to replace the radio in a Peugeot Expert van, a very simple and quick operation. First, ensure the vehicle is turn…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos