Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on the Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Air filter

To replace the engine air filter, follow these steps: open the hood, and at the top, you will find the box containing the filter. First, disconnect the air hose located in front of the filter, then use a screwdriver to loosen the clamp screw on the top of the filter. Unscrew the bolt on the side of the box by turning it half a turn. At this point, you can remove the filter housing and unscrew the two screws located on the back side of the box. Then, lift the cover of the compartment and remove the filter. Take the new filter and place it in the housing. Finally, reverse the steps to reassemble all components.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter of the Peugeot 301
Replacing the Cabin Air Filter of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Follow this guide to remove and replace the cabin air filter of the Peugeot 301. First, get inside the vehicle on the front passenger side and remove…
How to Change the Engine Oil in a Peugeot 301?
How to Change the Engine Oil in a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To change the engine oil in a Peugeot 301, access the underside of the vehicle at the engine compartment: here you will find the oil drain plug, whic…
How to Replace the Cabin Air Filter on the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) To replace the cabin air filter on this vehicle yourself, follow the instructions in this description and use the images from the tutorial video for …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos