Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Oil filter

Position a suitable container under the oil sump to collect the used oil and unscrew the drain plug located at the rear; once the draining is complete, apply a new copper washer to the plug and screw it back in; then access the engine compartment to replace the oil filter, which is located just below the fuel filter: use a metal strap wrench to remove it, lubricate the seal of the new filter with clean oil, and screw it in without exceeding the tightening torque; finally, fill the engine with clean oil until the level is reached.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement Instructions
Engine Oil Replacement Instructions
Peugeot 206 (1998-2012 / MK 1) Open the front bonnet and unscrew the oil filler cap to facilitate draining (preferably with the engine warm); position a container under the oil sum…
Replacing the Oil Filter on Peugeot 206 1.4 HDi
Replacing the Oil Filter on Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) The oil filter is often changed along with the engine oil; let's see how to proceed with the replacement. Pull up the bonnet release lever located at…
How to change the oil and replace the filter of the Peugeot 206 DIY
How to change the oil and replace the filter of the Peugeot 206 DIY
Peugeot 206 (1998-2012 / MK 1) On your Peugeot 206, this procedure helps you change the oil and replace the oil filter in an orderly manner, reducing the risk of leaks and incorrec…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos