Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Engine air filter replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Air filter
Operation: Engine air filter replacement

The engine air filter container (air box) is located right in the center of the engine itself: in order to replace the filter, therefore, unscrew the fixing screws of the cover (it is not necessary to remove them completely) and lift it in order to extract the old filter; if during this maneuver the duct to which the mass air sensor is connected should create difficulties, it can be disconnected; once the old filter has been removed, make sure that there are no residues of dirt inside the filter box and insert the new one making sure the gaskets adhere perfectly and then fix the cover.


Posted on 17 August 2023 by ScegliAuto



Engine air filter replacement
Peugeot 206 (1998-2012 / MK 1) The replacement of the engine air filter is an extremely simple maintenance: unscrew the fixing screws of the cover of the box that contains the filt
Cabin air filter replacement
Peugeot 206 (1998-2012 / MK 1) The passenger compartment air filter is located in the engine compartment, on the passenger side, immediately under the windscreen, behind the shock
Engine air filter replacement
Peugeot 206 (1998-2012 / MK 1) The engine air filter container (airbox) is located in the front left of the engine compartment (when viewed from the front); the cover is fixed with

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos