Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to change the battery on a Peugeot 207 1.4 HDI

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Battery
Operation: How to change the battery on a Peugeot 207 1.4 HDI

Let's see how to change the battery of a Peugeot 207 HDI: in order not to lose the settings of the radio and other electronic equipment, it is possible to use a buffer battery, which we can connect to the diagnostic socket. The battery in the engine compartment, on the right side of the engine. We will have to remove the cover that protects the battery. Disconnect the poles of the battery, starting with the negative one, and moving the connectors away to avoid accidental contact while we carry out the operation. We then gently remove the control unit from its housing. We press the clips that allow us to remove the battery. Put the new battery back in its place, inserting it into its clips. We put the control unit in its place. We reconnect the poles of the battery starting with the positive one and then put the plastic cover back in its place. The job is done.


Posted on 30 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the battery in a Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the battery for the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos