Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to change rear brake pads on Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 2, T9 - Years 2013-2021
Part: Brake pads
Operation: How to change rear brake pads on Peugeot 308

Let's see how to change the rear brake pads on the Peugeot 308. Let's open the hood of the 308 and open the brake fluid reservoir cap. Now we need to lift the rear of the car. We loosen the bolts of the rear wheels and then place it on two stands (let's not trust our jack too much). in any case, the wheels must always be placed under the car, for safety. If the car has an electric handbrake, we have to put it in "maintenance" mode using a diagnostic tool". Now with a flat screwdriver, lever the front of the caliper: in this way we will retract the piston. Remove the screws from the column, from the back, then we place the caliper on the coils of the shock absorber spring. We can remove the pads, and with a wire brush, clean the support, Now we spread copper grease on the end of the new pads, then mount the fixing tabs. Insert the new pads in the support; put the caliper back in place and screw the stud bolts back in. Reactivate the electric handbrake. We can put the wheels back in place, operation completed.


Posted on 6 May 2023 by ScegliAuto



How to replace the brake pads on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear pads of the Peugeot 308 worn out? Let's see the replacement. We lift the car on a column point to the desired height, remove the wheel.
Replacing the front brake pads of the Peugeot 308
Peugeot 308 (2013-2021 / MK 2, T9) In this guide, let's see the instructions needed to disassemble and replace the front brake pads of the Peugeot 308. First, we raise the car and star
How do you replace the rear brake pads on a Peugeot 208?
Peugeot 308 (2013-2021 / MK 2, T9) To be able to replace the rear brake pads of the Peugeot 308 you have to go and lift the car with a jack, so that the corresponding wheel is not in c

    Frequently Asked Questions

    • 308 2013-2021 - How much does it cost to replace the brake pads on Peugeot 308? Read Answer
    • 308 2013-2021 - How long do the brake pads last on Peugeot 308? Read Answer
    • 308 2007-2014 - How much do the Peugeot 308 brake pads cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos