Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box of the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Fuse box

On this model of car from the French manufacturer, there are two fuse boxes. The first is located in the driver’s compartment at the bottom of the dashboard near the door, while the second fuse box is located in the engine bay on the left side near the battery. Specifically, the cigarette lighter fuse in this vehicle is found in the box located in the cabin and is marked with number 15. Below is the fuse diagram for the engine bay: F19 Front windscreen wiper. F20 Front and rear washer pumps. F21 Headlight wash. F22 Horn. F23 Right main beam. F24 Left main beam.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Peugeot 308?
Where is the fuse box located in the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) The Peugeot 308 mk2 has two fuse boxes. The first fuse box is located under the bonnet, specifically near the battery. The second fuse box is found i…
Where is the fuse box of the Peugeot 308 located?
Peugeot 308 (2007-2014 / T7, MK 1) The 2010 Peugeot 308 1.6 Vti has two fuse boxes inside. The first fuse box is located inside the engine compartment, near the battery. The second fus…
Placement of the fuse box of the Peugeot 308
Placement of the fuse box of the Peugeot 308
Peugeot 308 (2021-2026 / P5, MK 3) .. it will be useful to know the location of the fuse box of the Peugeot 308, in order to carry out the necessary checks and proceed with any replacements... …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos