Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the particulate filter from the Peugeot 308CC?

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Diesel particulate filter

In order to remove the particulate filter from the Peugeot 308CC, you need to completely disassemble the catalyst located before the car's exhaust terminal: to do this, you will need to lift the car with a bridge and loosen the screws that secure the panel. at the bottom center of the car. Once this panel has been removed, it will be possible to identify the catalytic converter, which can be removed by unscrewing the screws of the relative fastening rings: when the catalytic converter has been removed, it will be possible to disassemble it to extract the particulate filter inside.

Posted on 18 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and cleaning of the particulate filter for the Peugeot 308.
Disassembly and cleaning of the particulate filter for the Peugeot 308.
Peugeot 308 (2013-2021 / MK 2, T9) Let's see below the instructions that will allow us to disassemble the particulate filter of the Peugeot 308. First, we open the engine hood of our c…
Add the wax liquid to the Peugeot 308 1.6 HDi
Add the wax liquid to the Peugeot 308 1.6 HDi
Peugeot 308 (2007-2014 / MK 1, T7) In today's video tutorial we will see how to add the wax liquid of the particulate filter, which is used to retain exhaust gas emissions, on a Peugeo…
Replacement of the air filter of the Peugeot 308 1.6 HDI
Replacement of the air filter of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / MK 2, T9) Today we will see, in this video tutorial, how to remove and replace the Peugeot 308 1.6 HDI engine air filter. First we open the bonnet of our car a…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos