Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorbers on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Shocks

See other generations:
Video tutorial

To replace the shock absorbers on a Peugeot 308, lift the rear, insert axle stands, and remove the wheels. Using a 10 mm socket, unscrew the plastic cover of the shock absorber and remove it. Move to the boot, where you will find a small cover behind which is the upper fixing bolt, which you will unscrew with a spanner and an Allen key. Move to the bottom and, using 18 mm spanners, unscrew the lower fixing point, and the old shock absorber will slide out. Take the new one and recover the old protective boot, reassemble everything starting from the bottom, initially tightening the bolts by hand and then with a torque wrench.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Replacing the Rear Shock Absorbers of the Peugeot 308 MK1
Replacing the Rear Shock Absorbers of the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) To replace the rear shock absorbers of the Peugeot 308, lift the rear wheel with a jack and insert a jack stand, remove the wheel and place it under …
How to Remove the Rear Seats of the Peugeot 308?
How to Remove the Rear Seats of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the rear seats of the Peugeot 308, lift the cushions from the back to loosen the pins located at the front. By removing these pins, the cu…
How to Replace the Rear Bumper on a Peugeot 308
How to Replace the Rear Bumper on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To replace the rear bumper on a Peugeot 308, open the boot lid and remove the side internal trim to access the upper fixing bolts, then unscrew them.…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos