Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

To replace the battery on this car model, follow the procedure outlined below for a safe and correct replacement. Once you open the bonnet, locate the battery on the left side and disconnect the fuse box located above it and the control unit on the side.

Next, disconnect the negative terminal first, followed by the positive terminal. Remove the battery from its housing and replace it with the new one, then reconnect the positive terminal first and the negative terminal afterwards.

Finally, refit the control unit and the fuse box.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

In the Peugeot 208, how do you remove the power battery?
In the Peugeot 208, how do you remove the power battery?
Peugeot 208 (2012-2019 / MK 1, A9) In the video presented here, the operations necessary to disassemble the power battery of the Peugeot 208 are described and shown, and not only that,…
Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / MK 1, A9) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How to Replace the Battery in a Peugeot 208
How to Replace the Battery in a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this guide, you will find instructions to remove and replace the battery in a Peugeot 208. First, open the bonnet and disconnect both battery term…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos