Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Brake Pad Replacement

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the rear brake pads, you will need the appropriate tool to rotate and retract the caliper piston. First, lift the vehicle and remove the rear wheel.

Then, unscrew the caliper fixing bolts and remove the caliper, possibly hanging it with a tie strap. Slide out the old pads, insert the new ones, and use the tool to rotate and retract the caliper piston.

Reposition the caliper in its place, tighten the fixing bolts, and pump the brake pedal until it offers the correct resistance.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Change Front Brake Pads on Partner Tepee
How to Change Front Brake Pads on Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) What to do if you have brake operation issues? Remove the brake pads, as shown on the Partner Tepee. Lift the Peugeot vehicle on a column lift (jack)…
How to Replace the Brake Pads on a Peugeot Expert
How to Replace the Brake Pads on a Peugeot Expert
Peugeot Partner Tepee (2008-2018 / B9) Learn how to replace the rear brake pads on a Peugeot Expert. First, lift the vehicle on a column jack to the desired height, then remove the wheel (…
How to Replace the Stop Switch in the Peugeot Partner Van?
How to Replace the Stop Switch in the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see where to find and how to replace the stop switch in the Peugeot Partner van, a very simple operation. As shown, it is …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos