Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stop Switch in the Peugeot Partner Van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see where to find and how to replace the stop switch in the Peugeot Partner van, a very simple operation. As shown, it is not located where you would normally expect, i.e., on the brake pedal, but is instead positioned on the passenger side, protected by a black plastic cover.

If you need to remove it, first unclip the cover by pulling it towards you, then grasp the switch, rotate it counterclockwise, and pull it out of the mount. Once disconnected, you can fit the replacement by following the reverse procedure.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Wiring Diagram for the Peugeot Partner Van
Wiring Diagram for the Peugeot Partner Van
Peugeot Partner Tepee (2008-2018 / B9) In this valuable video, you can find the complete wiring diagram for the Peugeot Partner Van, including wiring indications and a series of handwritte…
Where is the heating resistor located in the Peugeot Partner van?
Where is the heating resistor located in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, you can see where the heating resistor is located in the Peugeot Partner van and how to proceed if you need to replace it, a very simp…
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see how to replace the headlight bulbs on the Peugeot Partner van, a very simple and quick operation. First, ensure that t…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos