Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Front Brake Pads on Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

What to do if you have brake operation issues? Remove the brake pads, as shown on the Partner Tepee. Lift the Peugeot vehicle on a column lift (jack) to the desired height, then remove the wheel (using a telescopic spanner or air drill) along with the respective pins.

Unscrew the caliper locking pin and remove the caliper from the wheel hub. Use a screwdriver to detach the pads from the wheel hub caliper, then remove the disc brake caliper. Fit the new disc and the new pads onto the caliper, then mount the brake caliper with the support onto the brake disc.

Tighten all the wheel pins. Press the brake and check its operation.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
How to Replace the Brake Pads on a Peugeot Expert
How to Replace the Brake Pads on a Peugeot Expert
Peugeot Partner Tepee (2008-2018 / B9) Learn how to replace the rear brake pads on a Peugeot Expert. First, lift the vehicle on a column jack to the desired height, then remove the wheel (…
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos