Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to reset the service light on a Peugeot 2008.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Instrument cluster
Operation: How to reset the service light on a Peugeot 2008.

To reset the service light on a Peugeot 2008 - after having performed the required services from the maintenance schedule - get into the car and close all four doors. Turn on the instrument panel without starting the engine. Press and hold the satellite button (located on the top of the lever) on the left side of the steering wheel. A countdown will begin. When the countdown reaches zero, release the button. Now you can turn off the instrument panel. To verify, turn on the instrument panel again to check that the service light has actually turned off.


Posted on 30 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - What does the orange engine warning light on the Peugeot 2008 indicate? Read Answer
    • Peugeot 2008 2013-2019 - What does the red engine warning light on the Peugeot 2008 indicate? Read Answer
    • Peugeot 2008 2019-2026 - Why is the Peugeot 2008 AdBlue warning light flashing? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue light mean? Read Answer
    • Peugeot 2008 2019-2026 - What problems at start and stop on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why does the Peugeot 2008 instrument cluster not light up? Read Answer
    • Peugeot 2008 2019-2026 - When does the AdBlue error light appear on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What problems does the Peugeot 2008 screen have? Read Answer
    • Peugeot 2008 2013-2019 - What is the meaning of the yellow warning lights on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What does it mean when the engine trouble light comes on on the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if there is an engine malfunction message on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue warning light mean? Read Answer
    • Peugeot 2008 2019-2026 - What does the orange warning light on the steering wheel of the Peugeot 2008 Mk2 mean? Read Answer
    • Peugeot 2008 2019-2026 - What to do when the Peugeot 2008 engine failure warning light comes on? Read Answer
    • Peugeot 2008 2019-2026 - What does the Peugeot 2008 AdBlue warning light mean? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the service warning light comes on on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where are the Peugeot 2008 warning lights shown? Read Answer
    • Peugeot 2008 2013-2019 - What does the AdBlue warning light indicate on the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos