Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue in the Peugeot 301?

Model: Peugeot 301 MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: AdBlue warning light

Video tutorial

If the AdBlue warning light is on in the dashboard of your Peugeot 301, it means that the emissions fluid has reached a too low level and needs to be refilled. This is an extremely simple and quick operation; let's see how to proceed in this tutorial.

First, purchase a jug of urea from your trusted auto parts store, then ensure the engine is off and open the trunk. Next, remove both the floor panel and the spare tire, open the indicated cap, and add the necessary amount of fluid to reach the maximum level.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Peugeot 301?
How to Change the Engine Oil in a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To change the engine oil in a Peugeot 301, access the underside of the vehicle at the engine compartment: here you will find the oil drain plug, whic…
How to Replace the Radio in the Peugeot 301?
How to Replace the Radio in the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the radio in the Peugeot 301, pry underneath the trim that surrounds the radio display to detach it from its housing and disconnect the un…
How to Replace the Cabin Air Filter on a Peugeot 301?
How to Replace the Cabin Air Filter on a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the cabin air filter on a Peugeot 301, detach the plastic cover from the lower footwell on the passenger side: after removing this cover, …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos