Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door panel on the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel on the Peugeot 308, use a tool to pry off the trim of the armrest located in the centre of the panel. Underneath the trim and the armrest, you will find the securing screws that need to be loosened.

By unscrewing the screw at the bottom centre of the panel, you can completely detach it from its position and disconnect the underlying connectors. This will allow you to insert the new replacement part, connecting and securing it properly in its place.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to remove the door panel of a Peugeot 308?
How to remove the door panel of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and un…
How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos