Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Peugeot 5008 (II)

Model: Peugeot 5008 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video tutorial, see how to replace the diesel filter in a Peugeot 5008 (II). First, purchase a new diesel filter from an authorised car parts dealer. Place the new filter in a container with diesel to allow it to soak.

Lift the vehicle using a hydraulic jack and secure it with axle stands. Remove the cover that conceals the diesel filter; then, disconnect the pipes.

Using a 19mm hex key, unscrew the diesel filter holder (at some point, diesel will spill out). Once the filter is removed, fill the filter holder with diesel as much as possible, insert the two new seals: one on the new diesel filter and the other on the fixed part of the filter holder (grease the seals with a bit of oil). After replacing the filter, use a syringe to fill it with diesel to avoid straining the system.

Finally, turn on the vehicle's ignition 5/6 times to activate the pumps without starting the vehicle (this should allow the vehicle to start on the first attempt).


Updated on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Peugeot 5008
How to Replace the Diesel Filter on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) How do you replace the diesel filter on a Peugeot 5008? Follow these steps: lift the bonnet and secure it with the supplied prop rod; remove the engi…
How to Replace the Diesel Filter on the Peugeot 5008?
How to Replace the Diesel Filter on the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In this tutorial, you can see how to replace the diesel filter on the Peugeot 5008, an extremely simple and quick operation. First, ensure that the e…
Locating the Diesel Filter on the Peugeot 5008 2020
Locating the Diesel Filter on the Peugeot 5008 2020
Peugeot 5008 (2017-2024 / MK 2) In this video, we can see where the diesel filter is located on the second generation Peugeot 5008: it is situated in the central area of the vehicle…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos