Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Headlight bulb

This brief and simple guide will illustrate the steps to remove and replace the front headlight bulb on the Peugeot 2008. First, open the vehicle's bonnet and remove the protective plastic cover for the bulbs; then disconnect the electrical connector and unclip the metal spring to remove it, as shown in the video. At this point, install the new dipped beam bulb of the correct type (in this case, H7); connect the electrical wiring and check its operation before reassembling everything!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front pole light bulb of the Peugeot 2008
How to replace the front pole light bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to replace the front headlight bulbs of the Peugeot 2008. To replace the bulb of the right front headlight, we need to open…
How to change the front headlight bulb of the Peugeot 2008
How to change the front headlight bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this new guide, we will explain the steps you need to take if you want to replace the front headlight bulb of your first edition Peugeot 2008 on y…
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) These short and simple steps will show us the process of disassembling and replacing the dipped beam bulb of the front headlight of the Peugeot 2008.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos