Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses in the Peugeot 5008?

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Fuse box

There are two fuse boxes in the Peugeot 5008: in the cabin, it is located on the left side of the steering wheel; at the bottom, there is a small cover that you will need to remove by pulling it to access the fuses. In the engine compartment, the fuse box is located on the left side near the car's battery; to access the fuses, remove the cover by acting on the side tabs. To replace a fuse, locate it, grasp it with small pliers, pull it out, and check if the bridge inside is intact; if the bridge is broken, the fuse needs to be replaced. Replace a fuse with one of the same amperage.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the air conditioning fuses located in the Peugeot 5008?
Where are the air conditioning fuses located in the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In this video, you can see where the air conditioning fuses are located in the Peugeot 5008, which are the first components to check if it suddenly s…
Where are the fuses of the Peugeot 5008 located?
Where are the fuses of the Peugeot 5008 located?
Peugeot 5008 (2009-2016 / MK 1) Each fuse of the Peugeot 5008 is located inside one of the appropriate fuse boxes that are present on the vehicle: in this type of car it will be pos…
Where are the fuses located in the Peugeot 5008?
Where are the fuses located in the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) The fuses in the Peugeot 5008 are contained within the designated fuse boxes installed in the vehicle: in this car model, you can find two boxes for …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos