Do it yourself
| ||||
|
Peugeot 508 - Video tutorial
Model: Peugeot 508
MK 1
- Years 2010-2018 To replace the alternator of the Peugeot 508, we start by grabbing the tensioner notch with a wrench and pulling; we insert an Allen key into the hole to lock the tensioner, remove the drive belt, inspect it; remove the 3 10mm bolts on the tensioner and remove it; remove the pressure sensor bolt with an 8mm wrench, remove the fastening device that holds the sensor tubes using a small flathead screwdriver; remove the intercooler tubes by loosening the clamps that hold them; remove the tension cable bolt of the alternator (don't forget to disconnect the battery first); remove the two outer 16mm bolts on the alternator; using a 16mm wrench, remove the upper internal bolt on the alternator; once the bolt is removed, use a lever to lift the alternator forward; remove the bracket near the DPF, using a 16mm wrench, remove the lower internal bolt of the alternator, then we can remove the alternator; to reassemble it, perform the reverse procedure compared to disassembly.
Posted on 4 September 2023 by ScegliAuto
How to replace the diesel filter of the Peugeot 508 2.0 HDI
Peugeot 508 (2010-2018 / MK 1) Today's guide will show us how to disassemble and replace the diesel fuel filter of the Peugeot 508 2.0 HDI, in simple and quick steps. First of all,
Replace the diesel filter on Peugeot 508 2.0 Hdi
Peugeot 508 (2010-2018 / MK 1) Do we want to replace the diesel filter of a Peugeot 508? Let's see the disassembly of all the pieces. We lift the front hood of the car, remove the
Fuse diagram of the Peugeot 508 station wagon
Peugeot 508 (2010-2018 / MK 1) This video shows the location of the fuse box of the Peugeot 508 and its fuse assignment. This video is suitable for both the 508 sedan and the 508 s Other guides that may interest you
|
How do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |