Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

If the tyre pressure on your Peugeot 2008 drops, an orange warning light with the symbol of a tyre section and an exclamation mark will illuminate on the dashboard. After performing the necessary checks and restoring the correct inflation pressures, you need to reset the warning light.

Sit in the driver's seat and locate a button on the dashboard that has the symbol of a tyre section and the word SET. Start the vehicle and press the button for a few seconds; a beep will indicate that the reset has been successful. Turn the car off and back on to verify that the operation was correct.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Peugeot 2008?
How to Reset the Tyre Pressure Light on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) In this tutorial, you will learn how to reset the tyre pressure light on the Peugeot 2008. This simple and quick operation should only be performed a…
How to reset the tyre pressure warning light on the Peugeot 2008?
How to reset the tyre pressure warning light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To reset the tyre pressure warning light on the Peugeot 2008, turn on the ignition to access the menu on the central display: press the button with t…
How to Reset the Tyre Warning Light on the Peugeot 2008?
How to Reset the Tyre Warning Light on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Resetting the tyre warning light on the Peugeot 2008, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos