Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the window switch on the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

In this video, we see how to clean the window switches on the Peugeot 206: with a small screwdriver, remove the block, which accumulates a lot of dust, and this can cause malfunctions. Pull up the block and disconnect the electrical connector, then disassemble it into parts, always using the screwdriver, taking care not to damage anything.

Once the pieces are separated, it will be time to clean them. The electrical parts can be cleaned with a special spray, such as WD-40, while the plastic parts are cleaned well with water and a microfibre cloth.

Then reassemble all the parts and reconnect the electrical plug. Test that it works before putting the block back in place, and if everything is fine, refit it. Job done.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator on a Peugeot 206?
How to Replace the Window Regulator on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the window regulator on the Peugeot 206, loosen the screws that secure the door panel to its housing. These screws are located near the wi…
Replacing the Door Panel on a Peugeot 206
Replacing the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the sc…
How to Replace the Injectors on a Peugeot 206 1.4
How to Replace the Injectors on a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) In this guide, you will find the main instructions on how to remove and replace the injectors on a Peugeot 206 1.4. First, open the vehicle's bonnet …

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos