Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 508
    4. : How do you reset the Service light on the Peugeot 508?

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Checks and maintenance
Operation: How do you reset the Service light on the Peugeot 508?

The operation of resetting the Service light on the Peugeot 508 is done by pressing the button 000 located on the right side of the instrument panel, just below the central display. By continuing to hold down this button, it will be possible to insert the ignition key into the appropriate slot and turn it to position two, turning on the instrument panel. At this point, you must continue to hold down the button, noting that a countdown will appear on the instrument panel starting from ten: at the end of this countdown, you can release the button, completely resetting the light.


Posted on 9 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 508 2018-2026 - How do you reset the AdBlue warning light on a Peugeot 508? Read Answer
    • 508 2010-2018 - Where is the AdBlue tank located in the Peugeot 508? Read Answer
    • 508 2010-2018 - What is the problem with the AdBlue tank on the Peugeot 508? Read Answer
    • 508 2018-2026 - What could be the cause of the window problems in the Peugeot 508? Read Answer
    • 508 2018-2026 - Why does the rear window of the Peugeot 508 no longer go up? Read Answer
    • 508 2018-2026 - What are the reasons why the Peugeot 508 SW has heating problems? Read Answer
    • 508 2018-2026 - What to do if the urea warning light comes on in the Peugeot 508? Read Answer
    • 508 2010-2018 - What do the B1003 and B1024 errors stored in the Peugeot 508 ECU mean? Read Answer
    • 508 2010-2018 - "Card not detected" error in the Peugeot 508, what does it mean? Read Answer
    • 508 2010-2018 - How much is the service of the Peugeot 508 diesel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos