Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram for a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Fuse box

The Peugeot 2008, first series model produced from 2013 to 2019, has three fuse boxes. With this very useful video guide, you can see the location, name, and operating amperage of each individual fuse and relay inside these boxes. The first two fuse boxes are located inside the vehicle's cabin, one behind a plastic cover under the steering wheel, and the other behind the glove compartment on the passenger side. Finally, the last fuse box can be found in the engine compartment on the right.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

The fuse assignment diagram for the Peugeot 2008, what is it?
The fuse assignment diagram for the Peugeot 2008, what is it?
Peugeot 2008 (2013-2019 / MK 1) The assignment of fuses is done taking into account what each of them protects against electrical overloads. A diagram is created, depicting the afor…
Diagram and Positioning of the Fuse Boxes of the Peugeot 2008
Diagram and Positioning of the Fuse Boxes of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Today's guide will show you the diagram and positioning of the fuse boxes of the Peugeot 2008. First, get into the vehicle and start removing the pla…
What is the Fuse Diagram for the Peugeot 2008?
What is the Fuse Diagram for the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) If one of the devices in your Peugeot 2008 has suddenly stopped working, you should first check the status of the respective fuses, the diagrams for …

Other guides you may be interested in

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where is the cooling fan relay located in the Peugeot 2008? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos