Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Diagram and positioning of the fuse boxes in the Peugeot 2008.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Fuse box
Operation: Diagram and positioning of the fuse boxes in the Peugeot 2008.

Today's guide will show us the diagram and positioning of the fuse boxes for the Peugeot 2008. First, we get into the car and start removing the plastic cover located on the bottom left of the steering wheel to access the internal fuse box. We can find the external fuse box in the engine compartment by removing the plastic cover next to the battery, as shown in the video. The guide then presents a scrolling diagram of the fuses, each associated with a code and corresponding amperage.


Posted on 3 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Where are the fuses located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where can I find the fuse diagram for the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the blower fuse located on a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the cooling fan relay located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where is the touch screen fuse located on Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuse boxes located on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the Peugeot 2008 passenger compartment fan fuse located? Read Answer
    • Peugeot 2008 2013-2019 - Where is the Peugeot 2008 cooling fan fuse located? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuses located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where are the fuses of a 2008 Peugout located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos