Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016 The AdBlue warning light that appears on the instrument panel of the Peugeot 3008 indicates that the additional liquid contained inside the car's tank is almost completely depleted: it will therefore be possible to turn off the light by topping up the liquid. To do this, you will need to open the rear door and remove the carpet at the base of the trunk: next to the spare wheel, you will find the tank cap, which will need to be removed in order to insert the necessary amount of liquid. After the top-up has been done, you will notice that the AdBlue warning light will disappear from the instrument panel.
Posted on 4 January 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |