Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the cabin pollen air filter.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Cabin air filter
Operation: How to replace the cabin pollen air filter.

First of all, identify the position of the anti-pollen climate control air filter which, in this case, is located between the engine compartment and the windscreen, on the passenger seat side. Specifically, it is located under the elongated triangular shaped grille that sits under the windshield wiper (as indicated by the red arrow in the images). To remove the pollen air filter, open the cover with the grille by pressing on the three clips indicated by the three arrows in the images. We find a large filter and a small filter. To remove them, press on both sides of each and release starting with the filter. Replace them with new filters. The pollen air conditioning filter should be replaced every 15,000 km or at least every year. The maintenance operation that is carried out in the images is carried out on a Peugeot 2008.


Posted on 16 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the cabin air filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the pollen filter located on Peugeot 2008? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos