Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

Replacing the battery on this car model is a fairly simple operation and does not require any special precautions other than the fact that, to access the pin of the fixing bracket attached to the base of the battery itself, you must unclip and remove the engine management unit located right next to the battery; once you open the front bonnet, the battery is located on the driver's side, just below the brake fluid reservoir; disconnect the terminals, remove the management unit, and unscrew the fixing bracket to then extract the battery from its housing.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Peugeot 208?
How do you replace the battery of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the battery of the Peugeot 208 by opening the hood to access the components in the engine compartment: here you will f…
How to replace the battery of the Peugeot 208
How to replace the battery of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the battery of the Peugeot 208, following the instructions …
Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / A9, MK 1) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos