Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016 The steps to follow to reset the service indicator light on a 2011 Peugeot 3008 are as follows: - turn on the instrument panel; - press the button located to the right of the instrument panel; - hold the button down until the countdown is complete; - release the button; - turn off and restart the vehicle; Only perform the reset after completing the maintenance operations such as oil and filter replacement, air filter replacement, fluid top-up, engine and timing belt check. Resetting the indicator without completing the maintenance can be detrimental to the control unit.
Posted on 16 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |