Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Caps on a Peugeot RCZ?

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Side mirror

In this tutorial, you will learn how to replace the mirror caps on a Peugeot RCZ, a very simple and quick operation. First, position yourself in front of the mirror in question, then move the glass inward, insert a spatula into the outer side gap, and lever it off the base. Next, unscrew the four indicated bolts using an Allen key, remove the frame, and continue unscrewing the remaining fixing screws. At this point, you can separate the cap from the mirror, position the replacement, and reassemble everything by following the reverse procedure.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the Peugeot RCZ car radio
How to disassemble the Peugeot RCZ car radio
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by you…
How do you replace the license plate light bulb on the Peugeot RCZ?
How do you replace the license plate light bulb on the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In order to replace the license plate light bulb of the Peugeot RCZ, it is necessary to pry it out with an object, so that it is possible to extract …
Where is the OBD port of the Peugeot RCZ located?
Where is the OBD port of the Peugeot RCZ located?
Peugeot Rcz (2010-2015 / MK 1) To be able to independently locate the OBD port inside your Peugeot RCZ, it only takes a few seconds. All you have to do is carefully read the follow…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos